Loading... Please wait...

Our Newsletter

Mesa Boogie Cabclone 4 Ohm (Also Available in 8, 16 ohm)

  • Image 1
  • Image 2
Bookmark and Share

Product Description

Mesa Boogie Cab Clone 4 Ohm

The NEW CABCLONE™ - Cabinet Simulator with Built-In Amp Load & Headphone Output

The CABCLONE™ is a passive Cabinet Simulator/Speaker+Mic alternative with a built-in Amp Load. It provides a direct interface of your guitar amp’s Speaker Output to the input of a mixing console, microphone preamp or even direct to your converters (recorder) with or without the need for a speaker cabinet. It’s also a Compensated Headphone Driver that delivers a great sounding, great feeling headphone-friendly version of your amp’s Tone that’s perfect for late night practice sessions or anytime you want to play without others listening.

CABCLONE™ - Cabinet Simulator with Internal Amp Load & Headphone Output

  • Designed and Handcrafted in Petaluma, California, USA
  • Passive Design – No Power Supply Required
  • Built-In Internal Amp Load FOR AMPS RATED 100 WATTS OR LESS (auto-activates when no cable is connected to “Thru” Output)
  • 1/4" “Input” Jack (receives signal from amp's speaker output)
  • 1/4" “Thru” Output Jack (defeats to Internal Load when no cable is connected)
  • 3-Position Cabinet Voicing Switch - Open-Back, Closed-Back & Vintage Closed-Back Cabinet Simulations
  • Variable -30 to +4db DI Output Level Control with presets for Dynamic Mic Level (-30db), Instrument Level (-10db) & Line Level (+4db)
  • Balanced XLR Direct Output (controlled by the Variable DI Output Level Control)
    • Independent Balanced, 1/4" +4 Line Level Output Jack
    • Compensated Headphone Output Jack (defeats balanced outputs when used)
    • Phase Switch – Normal (In) or Reverse (180°)
    • Ground Lift Switch
    • Removable Tilt-Back Stand (for use over an amp handle)

    • 4 Ohm – For amps rated 100 watts or less
    • 8 Ohm (standard) – For amps rated 100 watts or less
    • 16 Ohm – For amps rated 100 watts or less

    • Dimensions (W/D/H): 6.7" x 6.40" x 2.30" without tilt-back stand (3.30” with tilt back stand) 170.18mm x 162.56mm x 58.42mm without tilt-back stand (83.82” with tilt back stand)
    • Weight: 2.3lbs (1.04Kg) WITH Tilt-Back Stand
/ 2.2lbs (.998Kg) WITHOUT Tilt-Back Stand

    The Mesa Boogie Cabclone will be arriving late August, early September 2014.

    Find Similar Products by Tag

    Cab Clone  DI  USA  

    Find Similar Products by Category

    Add to Wish List

    Click the button below to add the Mesa Boogie Cabclone 4 Ohm (Also Available in 8, 16 ohm) to your wish list.

    You Recently Viewed...